Swartzmiller Lumber


Band-It Melamine Edging Pre-Glued 7/8" x 25' 10 Colors


How to apply BAND-IT MELAMINE:

Prepare Surface Edge: Fill any large holes- Sand rough spots- Remove sawdust- Cut edging 1/2" longer than surface to be covered

Apply Edging: Preheat iron on "cotton" setting- Position edging- Slowly press iron over length of edging- Check to see if glue is melting- NOTE: Use Kraft paper or aluminum foil to protect iron bottom

Bonding: While still hot, press edging down firmly with wood block or roller- MISTAKE? Simply reheat and reapply

Trim Edge: Allow edging to cool completely- Trim any excess with a BAND-IT Edge Trimmer, razor blade or file

Item Added.
Adding Item.